How a Locksmith Makes a Key

how a locksmith makes a key

Do you have ever wondered how a locksmith makes a key? You’ve probably been stuck inside your car, wondering how a locksmith gets a blank key to fit inside your lock. Now you can answer that question, and learn a little bit about what a locksmith does. In this article, you’ll learn how locksmiths make keys. If you want to learn how they do it yourself, read on for more information.

The tools that a locksmith uses to make a key are just as important as the blank. They make the process easier by making accurate cuts. A cheap locksmith will typically use a Swiss pattern file, a 6 inch Swiss #4 cut round file, or a pippin file. These are specialized tools that can make extremely precise cuts, making them the perfect tool for making a key. If you don’t have a Swiss pattern file, you can easily purchase one at a home improvement store.

Another reason you should hire a locksmith is that you need a new lock for your car, but you can’t find the original. Locksmiths are trained to make duplicate keys, and they have several ways to do it. If the original key has broken, the locksmith can use the code to create a new key. This method works amazingly well, but it may not be possible for you to make a key for your car if it’s too worn or too broken. If this is the case, you’ll need a new key to get the car going again.

The first step in the process of how a locksmith makes a key is to remove the lock’s cylinder. Once the cylinder is removed, the best locksmith will measure the pins and wafers inside it. Once the locksmith has determined how many pins or wafers need to be removed, the locksmith can cut the key. This method works for homeowners too, since the same technique can be applied to lost keys.

Once the cylinder is removed, the professional locksmith will then use a special piece of software to make a new key. If you don’t know the code to your car, you can ask your locksmith for a copy using visual decoding software. This method is used for worn-out keys, and is great for older vehicles, deadbolts, lock boxes, and car keys. The locksmith will examine the worn-out key and use visual clues to create a new key.

Once the locksmith has obtained the correct pins, they can then cut the blank into the proper shape. A locksmith may need to disassemble the lock to reverse engineer the pins within. This method is more complicated and more accurate than the former, but it is a great option if the key breaks inside the lock. This method requires the locksmith to disassemble the lock cylinder, which allows him to re-engineer how the key is bitted. A locksmith will need to use the height and alignment of the pins in order to get the right pins for the keys.

The disassembling process is a great way to learn how a locksmith makes a key. This is an essential step for locksmiths, as it will help them determine which keys work best for each lock. The locksmith will use a tool called a scope to do the work. Afterward, the locksmith will need to make a copy of the key with a new lock. You’ll have to be able to tell which type of lock you have, and which parts it uses, because each one uses a specific set of parts.